Dare to transfer your designs to textiles with DTF printing

[jrineakter]

One of the techniques that is gaining prominence is DTF printing, a process that allows high-quality designs to be transferred to textiles. Read on to learn more about this technique.

What is DTF printing?
DTF printing involves transferring a digital design onto a polyurethane-based adhesive film or powder, which is then applied to textiles using heat and pressure . This method allows for a wide variety of colors to be transferred, making it a perfect choice for those looking to customize garments with fine details and excellent adhesion.

DTF printing with polyurethane powder adhesive offers certain advantages over polyamide. For example, it offers greater resistance to washing , ensuring that prints maintain their quality and do not peel off after numerous cleaning cycles. This is due to the chemical structure of polyurethane, which resists degradation by water and detergents.

In addition, it is an elastic material , ideal for flexible garments and those that are subject to frequent stretching. In this way, prints are prevented from cracking or peeling off, preserving the original appearance of the surface. It also better resists high temperatures and intensive use , making it a reliable choice for work clothes and other garments subjected to extreme conditions.

DTF transfer process to textiles
DTF transfer to textile is best done with a heat press , although it is also possible to use a household iron. Below are the steps followed in DTF printing :

Garment preparation : Before denmark telegram mobile phone number list applying the design, the textile surface should be ironed for a few seconds to remove wrinkles and ensure that it is smooth.
Ironing : Place the film with the design on the desired area and press with medium pressure at a temperature between 140 and 160°C. The duration of ironing may vary depending on the material, but is generally a few seconds.
Removing the adhesive film : the film is removed hot (HOT-PEEL). If it does not come off immediately, it is advisable to wait a few seconds and try again.
Re-pressing : For a durable finish, re-press the garment by placing a sheet of Teflon or baking paper over the print. This re-pressing step, which takes approximately 5 seconds, helps to better integrate the design into the fabric.
As we have said before, if you do not have a heat press, you can use a conventional iron at 150°C . Simply place baking paper over the design and iron for a few seconds. After cooling, remove the film and the garment will be ready.

How can I prepare files for DTF printing?
DTF printing allows you to work in CMYK with white ink or only in white ink. If you choose to print in CMYK, you can send your design as you would read it and Oedim will take care of applying the white ink layer. If you prefer to work only with white ink, you must indicate this in the product configurator and send your design in black.

It is also very important that the files meet certain parameters to ensure an optimal result. The minimum resolution must be 200 dpi, although it is recommended to work with 300 dpi for greater definition.

On the other hand, the color space for DTF printing must be in CMYK and the color lines must have a minimum width of 1.0 mm, while white lines require at least 0.5 mm. In addition, all fonts must be converted to curves and the files must be in PDF/X-4 or PNG format without a background.